HDPE / PA66 Rail Plastic Sleeve for Rail Fastening System

Model NO.: Casting Part: Rail Fastener Color: Black, Yellow or Any Other Color Surface Treatment: Color Specification: SGS Certification: UIC, ASTM, BS, TB Warranty: >3 Years Material: HDPE / PA66 Trademark: Mingda Origin: Hebei, China
HDPE / PA66 Rail Plastic Sleeve for Rail Fastening System

Rail plastic sleeve is pressed in concrete sleeper and assembled with sleeper screws, guide plates

and rail clip to fix the rail. Our rail plastic sleeve is made using either HDPE or PA66 and the product

color is available in white, black and dark brown.

HDPE Rail Sleeve

No.	Technical Parameter	Unit	Technical Requirement	Value
1	Density	g/cm3	0.95-0.98	0.95
2	Tensile Strength	Mpa	≥19	19
3	Elongation	%	>80	150
4	Melting Point	ºC	170-190	190
5	Insulation Resistance	Ω	≥1×1010	3.5 ×1010
6	Hardness	A	≥98	98(A)

PA66 Rail Plastic Sleeve 

PA66: Nylon 66.69%, Glass Fiber 30%, Other 1%

No.	Technical Parameter	Unit	Technical Requirement	Value
1	Density	g/	1.3-1.45	1.45
2	Tensile Strength	Mpa	≥170	178
3	Elongation	%	≤4.4	4.0
4	Bending Strength	Mpa	≥250	290
5	Impact Strength (No gap)	KJ/m2	≥80	85
6	Melting Point	ºC	250ºC -270	270
7	Insulation Resistance	Ω	≥1×108	5×108
8	Glass Fiber Content	%	30-35	35
9	Hardness	HRR	≥110	118

Adhering to our quality first policy, Mingda pays great attention to quality control management. We have

been granted ISO9001-2008 certificates and have received the production license of China's Railway

Ministry on railway products. We have a full set of inspection instruments to ensure all our rail plastic

sleeve are of high quality and up to customers' requirements.

As a leading manufacturer of rail fastening based in China, Mingda also produces many other railway

fasteners, such as track bolt, sleeper screw, track spike, tie plate, rail clip, elastic rail clip, SKL tension

clamp, rail shoulder, and so on.

Company introduction :

Hebei Mingda International Trading Company is a trading company which is specialized

in castings, forgings and Machinery Parts.
 
 Our products include all kinds of raw castings to be made of ductile iron , grey iron ,

brass , Stainless Steel and aluminums, machined castings and forged parts . To make

these parts according to the customers' drawings , we have relative suitable production

craft and equipments, such as resin sand , sand mould , hot core boxes , lost-wax , lost -

foam and so on .

Specially for hydrant bodies and Valves' bodies, we have collected rich experience for

these products in the past 16 year's actual production, Now we are proud of our

products with good surface and high quality material. Whatever,we have been trying our

best to provide our customers with better quality castings by improving  production crafts

and more careful quality control.
 

Contact us if you need more details on Rail Fastener. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Rail Sleeve、Railway Parts. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Ductile iron and grey iron casting > train and railway part