TM semi automatic vacuum flute laminator
Basic Info
Model No.: TM-1300
Product Description
TM semi automatic vacuum flute laminator
This machine operation is stable, joint accurate, easy operation, need not skilled workers.
This machine is used for making Print paper and bottom paper(card paper, corrugated paper) match together accurately, then the paper level off, and high precision.
1. Feeding of high table, automatic feeding for bottom sheet, elastic front register, simple operation.
2. just need one person to feed the paper. It has low request to paper, suitable for laminating paperboard to bottom paperboard, ABCDE Flute corrugated cardboard. Even filmed paper can be laminated.
3. Top sheet forwarded by manual on high table and the sheet can be piled up to 1.8m.
4. Bottom sheet is automatically fed; the two sheets are piled freely; High efficiency
5. Advanced elastic front register is used for location, high register precision, bottom paper will never exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded.
6. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted.
7. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running.
7. The whole machine adopts PLC control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circiut breakdown can automatically display and alarm.
8. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade
9. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently.
10.. Gear rach is used to control the lift of water tray, which is easily taken out for cleaning.
model | TM-1300 | TM-1400 | TM-1500 | TM-1600 |
Max size of cover face | 1300x1100mm | 1400X1250mm | 1500X1250mm | 1600X1250mm |
Min size of cover face | 360x360mm | 360x360mm | 360x360mm | 360x360mm |
Economic speed | 0-100piece/min | 0-100piece/min | 0-100piece/min | 0-100piece/min |
precision | ≤±1mm | ≤±1mm | ≤±1mm | ≤±1mm |
power | 6kw | 6kw | 6kw | 6kw |
size | 8.8x1.95x1.5m | 8.8x2.05x1.5m | 8.8x2.15x1.5m | 8.8x2.25x1.5m |
weight | 3T | 3T | 3.5T | 3.5T |
Q1: When can I get the quotation?
A1: Usually you need to send below information, we will quote within 12 hours after we get it.
Q2: Can you help with the design?
A2: Yes, we have a professional team having rich experience in Die Casting moulds design and manufacturing. Just tell us your ideas and we will help to carry our your ideas into perfect moulds.
Q3: How long can I expect to get the sample?
Q4:How about the packing of products ?
A6:Tighten to container with steel wire rope and welded machine withcontainer
by angel iron B. Main corrugated box machines and uncoiler is packed with
waterproof plastic) C. PLC contral system and motor pump are packed in
wooden box with water proof paper coverage.
Q5: Where is your main market?
A7: Our products are exported to more than 30 countries and regions,
Mexico,Spain, Russia,Canada,Poland,Georgia,Bolivia,Hungary, Pakistan, Uzbekistan,Ukraine,Kyrghyz,Argentina,Venezuela, Egypt,Bulgaria,Brazil, Australia, Philippines, Indonesia,Australia, Algeria, Sri Lanka,Bengla, Saudi Arabia,Syria,Turkey,Ethiopia and so on.
Q6: We do not know how to operatemachine,how to deal?
A.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,accommodation,food and transposition in your country
B.You can send your men to our factory. we will teach them how to operate the machine without training charges
C.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manual first ,and get familiar with the machine. Then we can get a video call,and teach you on-line how to operate the machine.
Q7: If the machine has some problems,during we using ,How to deal?
A:24 months for the whole machine. Within 24 months under normal use and maintenance, if something is wrong with the machine, you will get spare part for free.Out of 24 months, you will get Spare Parts at cost price. You will also get technical support and service all the
lifetime.
welcome contact me in your spare time
WhatsApp:0086 15132707813
Product Categories : Automatic Flute Laminating Machine > TM Semi Automatic Flute Laminating Machine